Walls & Ceilings

Mask all floors entirely. Move or mask all furniture, fixtures, windows and any other surface that should not receive any paint. We cover all vulnerable areas to insure no drips or overspray gets on anything. Peri

Eliminate any dust, dirt or blemishes on all surfaces to receive paint. When necessary we apply a cleaning solution or a stripping solution prior to priming and or painting to make certain all surfaces are clean of any stains that could reappear.

We fill all nail holes, cracks and small dings and patch larger holes. When it comes to larger holes our trained professionals have the skills required to patch, skim coat and retexture any hole while matching up to the existing textures rendering the old hole undetectable. We stake our reputation on it.

Our completely straight lines are our reputation and claim to fame. We do not paint any lines by hand. All baseboards and casings (window & door Trim) are taped and then caulked to seal the tape down and not allow any bleeding. The end result are perfectly straight lines, This takes extra time but your house is worth it.

All walls and ceilings receive two coats of paint. Period! All paint is either rolled on or right after spray application the surfaces are then back rolled (rolled over with a roller) to insure proper adhesion. If paint that is sprayed on is not back rolled then whenever touch ups are applied the touched up area will “flash” (show a different sheen) and stand out. For this reason we never just blow and go as we say in our industry. This is what a lot of painters will do to cut corners and get the job done faster cheating you out of a quality product. This takes extra time but your house is worth it.